Instant Bonder Key Properties
Ethyl and Methyl Cyanoacrylate Adhesives

 

Ethyl Series
Instant Bonder - IB5
SEE THE TECHNICAL DATA SHEET (PDF) FOR MORE PROPERTIES

Viscosity (cps): 5
Gap Fill (in.): 0.002
Specific Gravity @ 77ºF / 25ºC: 1.04
Vapor Pressure, mm HG @ 70ºC: 10
Boiling Point: 365ºF
Softening Point: 311ºF
Tensile Shear, psi, ASTM-D1002 Data
Tensile, Steel, psi, ASTM-D2095: 4000 (± 10%)
Impact Ft-lbs, ASTM-D950: 3-5

Ethyl Series
Instant Bonder - IB20
SEE THE TECHNICAL DATA SHEET (PDF) FOR MORE PROPERTIES

Viscosity (cps): 20
Gap Fill (in.): 0.003
Specific Gravity @ 77ºF / 25ºC: 1.05
Vapor Pressure, mm HG @ 70ºC: 10
Boiling Point: 365ºF
Softening Point: 310ºF
Tensile Shear, psi, ASTM-D1002 Data
Tensile, Steel, psi, ASTM-D2095: 4000 (± 10%)
Impact Ft-lbs, ASTM-D950: 4-6

Ethyl Series
Instant Bonder - IB45
SEE THE TECHNICAL DATA SHEET (PDF) FOR MORE PROPERTIES

Viscosity (cps): 45
Gap Fill (in.): 0.004
Specific Gravity @ 77ºF / 25ºC: 1.06
Vapor Pressure, mm HG @ 70ºC: 10
Boiling Point: 365ºF
Softening Point: 306ºF
Tensile Shear, psi, ASTM-D1002 Data
Tensile, Steel, psi, ASTM-D2095: 4000 (± 10%)
Impact Ft-lbs, ASTM-D950: 7-10

Ethyl Series
Instant Bonder - IB100
SEE THE TECHNICAL DATA SHEET (PDF) FOR MORE PROPERTIES

Viscosity (cps): 100
Gap Fill (in.): 0.005
Specific Gravity @ 77ºF / 25ºC: 1.08
Vapor Pressure, mm HG @ 70ºC: 10
Boiling Point: 365ºF
Softening Point: 310ºF
Tensile Shear, psi, ASTM-D1002 Data
Tensile, Steel, psi, ASTM-D2095: 4000 (± 10%)
Impact Ft-lbs, ASTM-D950: 3-5

Ethyl Series
Instant Bonder - IB300
SEE THE TECHNICAL DATA SHEET (PDF) FOR MORE PROPERTIES

Viscosity (cps): 300
Gap Fill (in.): 0.006
Specific Gravity @ 77ºF / 25ºC: 1.09
Vapor Pressure, mm HG @ 70ºC: 10
Boiling Point: 365ºF
Softening Point: 304ºF
Tensile Shear, psi, ASTM-D1002 Data
Tensile, Steel, psi, ASTM-D2095: 4000 (± 10%)
Impact Ft-lbs, ASTM-D950: 3-5

Ethyl Series
Instant Bonder - IB600
SEE THE TECHNICAL DATA SHEET (PDF) FOR MORE PROPERTIES

Viscosity (cps): 600
Gap Fill (in.): 0.007
Specific Gravity @ 77ºF / 25ºC: 1.09
Vapor Pressure, mm HG @ 70ºC: 10
Boiling Point: 365ºF
Softening Point: 302ºF
Tensile Shear, psi, ASTM-D1002 Data
Tensile, Steel, psi, ASTM-D2095: 4000 (± 10%)
Impact Ft-lbs, ASTM-D950: 3-5

Ethyl Series
Instant Bonder - IB1500
SEE THE TECHNICAL DATA SHEET (PDF) FOR MORE PROPERTIES

Viscosity (cps): 1500
Gap Fill (in.): 0.010
Specific Gravity @ 77ºF / 25ºC: 1.10
Vapor Pressure, mm HG @ 70ºC: 10
Boiling Point: 365ºF
Softening Point: 301ºF
Tensile Shear, psi, ASTM-D1002 Data
Tensile, Steel, psi, ASTM-D2095: 4000 (± 10%)
Impact Ft-lbs, ASTM-D950: 4-6

Ethyl Series
Instant Bonder - IB2500
SEE THE TECHNICAL DATA SHEET (PDF) FOR MORE PROPERTIES

Viscosity (cps): 2500
Gap Fill (in.): 0.015
Specific Gravity @ 77ºF / 25ºC: 1.10
Vapor Pressure, mm HG @ 70ºC: 10
Boiling Point: 365ºF
Softening Point: 301ºF
Tensile Shear, psi, ASTM-D1002 Data
Tensile, Steel, psi, ASTM-D2095: 4000 (± 10%)
Impact Ft-lbs, ASTM-D950: 4-6

Ethyl Series
Instant Bonder - IB-SI
SEE THE TECHNICAL DATA SHEET (PDF) FOR MORE PROPERTIES

Viscosity (cps): 100
Gap Fill (in.): 0.010
Specific Gravity @ 77ºF / 25ºC: 1.10
Vapor Pressure, mm HG @ 70ºC: 10
Softening Point: 306ºF
Tensile Shear, psi, ASTM-D1002 Data
Tensile, Steel, psi, ASTM-D2095: 4000 (± 10%)
Impact Ft-lbs, ASTM-D950: 3-5

Ethyl Series
Instant Bonder - IB-HT
SEE THE TECHNICAL DATA SHEET (PDF) FOR MORE PROPERTIES

Viscosity (cps): 100
Gap Fill (in.): 0.004
Specific Gravity @ 77ºF / 25ºC: 1.06
Vapor Pressure, mm HG @ 70ºC: 10
Softening Point: 304ºF
Tensile Shear, psi, ASTM-D1002 Data
Tensile, Steel, psi, ASTM-D2095: 4000 (± 10%)
Impact Ft-lbs, ASTM-D950: 8-12

Ethyl Series
Instant Bonder - IB-HI
SEE THE TECHNICAL DATA SHEET (PDF) FOR MORE PROPERTIES

Viscosity (cps): 1500
Gap Fill (in.): 0.012
Specific Gravity @ 77ºF / 25ºC: 1.10
Vapor Pressure, mm HG @ 70ºC: 10
Softening Point: 302ºF
Tensile Shear, psi, ASTM-D1002 Data
Tensile, Steel, psi, ASTM-D2095: 4000 (± 10%)
Impact Ft-lbs, ASTM-D950: 15-25

Ethyl Series
Instant Bonder - IB-EPDM
SEE THE TECHNICAL DATA SHEET (PDF) FOR MORE PROPERTIES

Viscosity (cps): 100
Gap Fill (in.): 0.010
Specific Gravity @ 77ºF / 25ºC: 1.10
Vapor Pressure, mm HG @ 70ºC: 10
Softening Point: 310ºF
Tensile Shear, psi, ASTM-D1002 Data
Tensile, Steel, psi, ASTM-D2095: 4000 (± 10%)
Impact Ft-lbs, ASTM-D950: 3-5

Ethyl Series
Instant Bonder - IB-NF
SEE THE TECHNICAL DATA SHEET (PDF) FOR MORE PROPERTIES

Viscosity (cps): 100
Gap Fill (in.): 0.010
Specific Gravity @ 77ºF / 25ºC: 1.10
Vapor Pressure, mm HG @ 70ºC: 10
Softening Point: 311ºF
Tensile Shear, psi, ASTM-D1002 Data
Tensile, Steel, psi, ASTM-D2095: 3000 (± 10%)
Impact Ft-lbs, ASTM-D950: 3-5

Ethyl Series
Instant Bonder - IB-B
SEE THE TECHNICAL DATA SHEET (PDF) FOR MORE PROPERTIES

Viscosity (cps): 2500
Gap Fill (in.): 0.012
Specific Gravity @ 77ºF / 25ºC: 1.10
Vapor Pressure, mm HG @ 70ºC: 10
Softening Point: 301ºF
Tensile Shear, psi, ASTM-D1002 Data
Tensile, Steel, psi, ASTM-D2095: 4000 (± 10%)
Impact Ft-lbs, ASTM-D950: 4-6

Ethyl Series
Instant Bonder - IB-101
SEE THE TECHNICAL DATA SHEET (PDF) FOR MORE PROPERTIES

Viscosity (cps): 100
Gap Fill (in.): 0.004
Specific Gravity @ 77ºF / 25ºC: 1.09
Vapor Pressure, mm HG @ 70ºC: 10
Softening Point: 306ºF
Tensile Shear, psi, ASTM-D1002 Data
Tensile, Steel, psi, ASTM-D2095: 5000 (± 10%)
Impact Ft-lbs, ASTM-D950: 15-25

Ethyl Series
Instant Bonder - IB-GEL
SEE THE TECHNICAL DATA SHEET (PDF) FOR MORE PROPERTIES

Viscosity (cps): 50000
Gap Fill (in.): 0.015
Specific Gravity @ 77ºF / 25ºC: 1.05
Vapor Pressure, mm HG @ 70ºC: 10
Softening Point: 301ºF
Tensile Shear, psi, ASTM-D1002 Data
Tensile, Steel, psi, ASTM-D2095: 4000 (± 10%)
Impact Ft-lbs, ASTM-D950: 3-5

Methyl Series
Instant Bonder - IBM5
SEE THE TECHNICAL DATA SHEET (PDF) FOR MORE PROPERTIES

Viscosity (cps): 5
Gap Fill (in.): 0.002
Specific Gravity @ 77ºF / 25ºC: 1.04
Flash Point TCC F: >178ºF  (81ºC)
Vapor Pressure, mm HG @ 77ºF: <1
Cure Speed (Steel to Steel): < 7 Sec.
Temperature Range: -65ºF to 175ºF
Tensile Shear, psi, ASTM-D1002 Data

Methyl Series
Instant Bonder - IBM45
SEE THE TECHNICAL DATA SHEET (PDF) FOR MORE PROPERTIES

Viscosity (cps): 45
Gap Fill (in.): 0.004
Specific Gravity @ 77ºF / 25ºC: 1.05
Flash Point TCC F: >178ºF  (81ºC)
Vapor Pressure, mm HG @ 77ºF: <1
Cure Speed (Steel to Steel): < 10 Sec.
Temperature Range: -65ºF to 175ºF
Tensile Shear, psi, ASTM-D1002 Data

Methyl Series
Instant Bonder - IBM100
SEE THE TECHNICAL DATA SHEET (PDF) FOR MORE PROPERTIES

Viscosity (cps): 100
Gap Fill (in.): 0.005
Specific Gravity @ 77ºF / 25ºC: 1.07
Flash Point TCC F: >178ºF  (81ºC)
Vapor Pressure, mm HG @ 77ºF: <1
Cure Speed (Steel to Steel): < 15 Sec.
Temperature Range: -65ºF to 175ºF
Tensile Shear, psi, ASTM-D1002 Data

SF* = Substrate Failure (adhesive bond was stronger than substrate)

Attention These products are not recommended for pure oxygen systems.

Arrow left Back to Cyanoacrylate Adhesives Main Page

 

Steel: 2700 (± 10%)
Aluminum: 1600 (± 10%)
ABS: SF*
Nylon: SF*
Rigid PVC: SF*
SBR: SF*
EDPM: 100 (± 10%)

Steel: 2700 (± 10%)
Aluminum: 1600 (± 10%)
ABS: SF*
Nylon: SF*
Rigid PVC: SF*
SBR: SF*
EDPM: 100 (± 10%)

Steel: 2700 (± 10%)
Aluminum: 1600 (± 10%)
ABS: SF*
Nylon: SF*
Rigid PVC: SF*
SBR: SF*
EDPM: 100 (± 10%)

Steel: 2400 (± 10%)
Aluminum: 1600 (± 10%)
ABS: SF*
Nylon: SF*
Rigid PVC: SF*
SBR: SF*
EDPM: 100 (± 10%)

Steel: 2300 (± 10%)
Aluminum: 1600 (± 10%)
ABS: SF*
Nylon: SF*
Rigid PVC: SF*
SBR: SF*
EDPM: 100 (± 10%)

Steel: 2300 (± 10%)
Aluminum: 1600 (± 10%)
ABS: SF*
Nylon: SF*
Rigid PVC: SF*
SBR: SF*
EDPM: 100 (± 10%)

Steel: 2200 (± 10%)
Aluminum: 1600 (± 10%)
ABS: SF*
Nylon: SF*
Rigid PVC: SF*
SBR: SF*
EDPM: 100 (± 10%)

九五之尊电视剧最新章节免费阅读,九五之尊电视剧最新章节 九五之尊电视剧最新章节免费阅读,九五之尊电视剧最新章节 ,chengrendongman无弹窗全文阅读,chengrendongman无弹窗全 chengrendongman无弹窗全文阅读,chengrendongman无弹窗全 ,中国好声音2020播出时间最新章节目录,中国好声音2020播出 中国好声音2020播出时间最新章节目录,中国好声音2020播出

Steel: 2000 (± 10%)
Aluminum: 1600 (± 10%)
ABS: SF*
Nylon: SF*
Rigid PVC: SF*
SBR: SF*
EDPM: 100 (± 10%)

Steel: 2400 (± 10%)
Aluminum: 1600 (± 10%)
ABS: SF*
Nylon: SF*
Rigid PVC: SF*
SBR: SF*
EDPM: 100 (± 10%)

Steel: 2300 (± 10%)
Aluminum: 1600 (± 10%)
ABS: SF*
Nylon: SF*
Rigid PVC: SF*
SBR: SF*
EDPM: 100 (± 10%)

Steel: 2300 (± 10%)
Aluminum: 1600 (± 10%)
ABS: SF*
Nylon: SF*
Rigid PVC: SF*
SBR: SF*
EDPM: 100 (± 10%)

Steel: 2200 (± 10%)
Aluminum: 1600 (± 10%)
ABS: SF*
Nylon: SF*
Rigid PVC: SF*
SBR: SF*
EDPM: 100 (± 10%)

Steel: 2700 (± 10%)
Aluminum: 1600 (± 10%)
ABS: SF*
Nylon: SF*
Rigid PVC: SF*
SBR: SF*
EDPM: 100 (± 10%)

Steel: 2700 (± 10%)
Aluminum: 1600 (± 10%)
ABS: SF*
Nylon: SF*
Rigid PVC: SF*
SBR: SF*
EDPM: 100 (± 10%)

Steel: 2700 (± 10%)
Aluminum: 1600 (± 10%)
ABS: SF*
Nylon: SF*
Rigid PVC: SF*
SBR: SF*
EDPM: 100 (± 10%)

Steel: 2000 (± 10%)
Aluminum: 1600 (± 10%)
ABS: SF*
Nylon: SF*
Rigid PVC: SF*
SBR: SF*
EDPM: 100 (± 10%)

Steel: 2700 (± 10%)
Aluminum: 2400 (± 10%)
Copper: 2100 (± 10%)

Steel: 2700 (± 10%)
Aluminum: 2400 (± 10%)
Copper: 2100 (± 10%)

Steel: 2700 (± 10%)
Aluminum: 2400 (± 10%)
Copper: 2100 (± 10%)

SAF-T-LOK and SAF-T-EZE are registered trademarks of SAF-T-LOK International Corporation.

All product names, logos, and brands are property of their respective owners. All product names, logos and brands used on this website are for identification purposes only.